Connect the VCR output to the TV input, referring to your VCR’s instruction manual.
1 Make sure all units are turned off.2 Connect the camcorder to a TV or VCR as shown in the illustration ( pg. 22).If using a VCR . . . go to step 3.If not . . . go to step 4.

3

4 Turn on the camcorder, the VCR and the TV.5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.To choose whether or not the following displays appear on the connected TV . . .•Date/Time.... set “DATE/TIME” to “AUTO”, “ON” or “OFF”in the Menu Screen ( pg. 50).•Time Code.... set “TIME CODE” to “ON” or “OFF” in theMenu Screen ( pg. 50).•Playback Sound Mode, Tape Speed And Tape Running Displays for video playback

Or

Directory/File Names and Image Number/Total Number of Images for D.S.C. Playback

(GR-DVL817 only)

.... set “ON SCREEN” to “LCD” or “LCD/TV” in the Menu Screen ( pg. 50).

Or, press DISPLAY on the remote control (provided with GR-DVL817 only).

EN23

NOTES:

●It is recommended to use the AC Adapter as thepower supply instead of the battery pack (  pg. 9).●The S-Video cable is optional. Be sure to use the YTU94146A S-Video cable.

Consult the JVC Service Center described on the sheet included in the package for details on its availability. Make sure to connect the end with a core filter to the camcorder. The core filter reduces interference.

●To monitor the picture and sound from thecamcorder without inserting a tape or memory

card*, set the camcorder’s Power Switch to “” or “”, then set your TV to the appropriate input mode.

*GR-DVL817 only

●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.

●If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.