PIN-UP

Pin-Up mode*

FRAME Snapshot mode with frame*

FULL Snapshot mode with no frame*

MULTI-4

Multi-Analyzer 4

MULTI-9

Multi-Analyzer 9

*There is the sound effect of a shutter closing.

EN27

To Delete Unwanted Still Images . . ..... when unwanted still images are stored in the memory

card or its memory is full, refer to “Deleting Images” ( pg. 32) and delete unwanted still images.

To Remove The Shutter Sound . . ..... when you do not want to hear the shutter sound, set

“BEEP” to “OFF” in the Menu Screen ( pg. 46, 48). The sound is no longer heard from the speaker.

NOTES:

●Even if “MULTI-4” or “MULTI-9” is engaged, Snapshot

recording will be performed in the FULL mode during Digital Zoom or Night-Alive ( pg. 38).

●Even if “DIS” is set to “ON” ( pg. 47), the Stabilizer will be disabled.

●If Snapshot recording is not possible, “PHOTO” blinks when SNAPSHOT is pressed.

●If Program AE with special effects ( pg. 38) is engaged, certain modes of Program AE with special effects are disabled during Snapshot recording. In such a case, the icon blinks.

●If shooting is not performed for approx. 5 minutes when the Power Switch is set to “” or “” and power is supplied from the battery pack, the camcorder shuts off

automatically to save power. To perform shooting again, set the Power Switch to “OFF”, then to “” or “”.

●The Motor Drive mode ( pg. 42) is disabled when the VIDEO/DSC Switch is set to “”.

●Still images taken are compliant to DCF (Design rules for Camera File systems). They do not have any compatibil- ity with devices which are not compliant to DCF.