76 EN

 

TROUBLESHOOTING (cont.)

 

SYMPTOM

 

POSSIBLE CAUSES

 

CORRECTIVE ACTION

 

35. The LCD monitor image is

 

35. • During playback of the

 

35.

 

distorted.

 

unrecorded portion, High-

 

 

 

 

 

speed Search and still

 

————

 

 

 

playback, LCD monitor

 

 

 

 

 

 

 

 

 

indications appear distorted.

 

 

 

 

 

This is not a defect.

 

 

 

 

 

 

 

 

 

36. Images on the LCD monitor

 

36. • The speaker volume is too

 

36. • Turn the speaker volume

 

are jittery.

 

great.

 

down ( pg. 21).

 

 

 

 

 

 

 

37. Blocks of noise appear

 

37.

 

37. • Clean the video heads with an

 

during playback, or there is

 

————

 

optional cleaning cassette

 

no playback picture and the

 

 

( pg. 86).

 

 

 

 

 

screen becomes blue.

 

 

 

 

 

 

 

 

 

 

 

38. The LCD monitor, the

 

38.

 

38. • Wipe them gently with soft

 

viewfinder and the lens have

 

————

 

cloth. Wiping strongly can

 

become dirty (ex. finger-

 

 

 

cause damage ( pg. 77).

 

prints).

 

 

 

 

 

 

 

 

 

 

 

39. An unusual mark appears.

 

39.

 

39. • Check the section of the

 

 

 

————

 

manual that explains LCD

 

 

 

 

monitor/viewfinder indica-

 

 

 

 

 

 

 

 

 

 

tions ( pg. 80 – 84).

 

 

 

 

 

 

 

40. An error indication

 

40. • A malfunction of some kind

 

40. • Remove the power supply

 

(E01 — E06) appears.

 

has occurred. In this case the

 

(battery pack, etc.) and wait a

 

 

 

camcorder’s functions

 

few minutes for the indication

 

 

 

become unusable.

 

to clear. When it does, you

 

 

 

 

 

can resume using the

 

 

 

 

 

camcorder.

 

 

 

 

 

If the indication remains even

 

 

 

 

 

though you repeat the above

 

 

 

 

 

two or three times, please

 

 

 

 

 

consult your nearest JVC

 

 

 

 

 

dealer.

 

 

 

 

 

 

 

41. The charger indicator on the

 

41. • The temperature of the battery

 

41. • To protect the battery, it is

 

camcorder does not light.

 

is extremely high/low.

 

recommended to charge it in

 

 

 

• Charging is difficult in places

 

places with a temperature of

 

 

 

subject to extremely high/low

 

10°C to 35°C (50°F to 95°F)

 

 

 

temperatures.

 

( pg. 85).

 

 

 

 

 

 

 

42. When the image is printed

 

42. • This is not a malfunction.

 

42. • By recording with “DIS”

 

from the printer, a black bar

 

 

 

activated ( pg. 47) this can

 

appears at the bottom of the

 

 

 

be avoided.

 

screen.

 

 

 

 

 

 

 

 

 

 

 

43. When the camcorder is

 

43. • The DV cable was plugged/

 

43. • Turn the camcorder’s power

 

connected via the DV

 

unplugged with power turned

 

off and on again, then operate

 

connector, the camcorder

 

on.

 

it.

 

does not operate.

 

 

 

 

 

 

 

 

 

 

 

44. The memory card cannot be

 

44.

 

44. • Push in the memory card a

 

removed from the

 

————

 

few more times ( pg. 14).

 

camcorder.