Make sure all units are turned off.
Make connections to the device you want to connect to using a DV cable, as shown in the illustration.

Power Switch

To DV IN/OUT

Core filter

DV cable (optional)

Core filter

To DV IN

To DV

connector

connector

Video unit equipped with a DV connector

To PC connector

Digital Printer

PC connection cable

To RS-232C

EN69

Connection To A Video Unit Equipped With A DV Connector

Connection to the GV-DT3 Digital Printer (optional) allows you to print out images or transfer them to a PC. It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a DV connector. This function is called Digital Dubbing ( pg. 53), which offers virtually no image or sound deterioration.

1

2

3 If necessary, connect the PC connection cable (provided with GV-DT3) to the printer’s PC connector and the PC’s RS-232C connector.

4 Turn the camcorder’s Power Switch to “” while pressing down the Lock Button located on the switch and turn on the other units.

NOTES:

●It is recommended to use the AC Adapter as the power supply instead of the battery pack ( pg. 9).

●If Still Playback, Slow-Motion Playback (GR-DVL817 only), Fast-Forward or Rewind is attempted with the camcorder connected to a video unit via the DV connector, the image will take on an effect similar to a colored mosaic pattern or it will become black.

●Also refer to the instruction manuals of the connected units.●When using a DV cable, be sure to use the optional JVC VC-VDV204U DV cable.

●When using a cable supplied with a core filter, be sure to connect the end with the core filter to the camcorder. The core filter reduces interference.

PC