JVC GR-DVM5 manual Zoom Zoom magnification, DIS Digital Image Stabilizer

34ENRECORDING

AdvancedFeatures(Cont.)

ZOOM (Zoom magnification)

You can select 10X, 40X, or 100X maximum zoom magnifications. 10X–Optical zoom that does not degrade the quality of the recording. 40X–Electronic processing (Digital zoom) that lets you get closer up. 100X–Electronically-processed images at 100-times magnification.

NOTES:

●Even if 40X or 100X is selected, Digital Zoom (magnification of over 10X) cannot be used while functions done through Digital image processing (5SD mode, ☞ pg. 28, Picture Wipe/Dissolve function, ☞ pg. 39, Snapshot, ☞ pg. 30, etc.) are activated.

●During Full-Auto mode, 40X is selected automatically.

DIS (Digital Image Stabilizer)

When recording while holding the camcorder in your hand, or when shooting a subject with little or no contrast, subtle hand movements will cause shakiness in the recorded image.

ON –Compensates for relatively small shakes that occur when shooting close up. “” appears during recording.

OFF–When shooting with the camcorder in a fixed position or on a tripod, set the Stabilizer to “OFF”.

If you leave it on and then move or turn the camera to follow a moving subject, unnecessary compensation occurs and this can result in an unnatural recorded image.

NOTES:

●Even if the stabilizer is set to “ON ” in Manual mode, it is automatically set to “OFF” in Full Auto Mode.

●The Stabilizer cannot compensate for drastic hand movements while shooting.

●The Stabilizer will not work if the scene has little or no contrast.

●The “” indicator appears blinking if the Stabilizer cannot be used.

GAIN UP

Bright, natural recordings can be taken even in areas with low or poor lighting.

AGC–This is automatically activated during Full Auto mode. The overall appearance is jagged, but the image is bright.

AUTO A –The shutter speed is automatically adjusted (1/30 — 1/200 sec.). Shooting a subject in low or poor lighting at 1/30 sec. shutter speed provides a brighter image than in the AGC mode, but the subject's movements are not smooth or natural. When set to this mode, “ A ” is displayed.

OFF–Select this setting when lighting is not a problem. Enables recording of the actual brightness you see.