MasterPage: Left 
16 EN GETTING STARTED |
|
| |
Brightness Adjustment of the | Loading/Unloading a Cassette | ||
Display |
| The camcorder needs to be powered up to load | |
1 Set the power switch to |
| or eject a cassette. |
|
|
| Erase protection | |
“M” or “PLAY” while |
| PUSH HERE | tab |
pressing down the lock |
|
| |
|
|
| |
button located on the |
|
|
|
switch. | Up (4/9) |
| Make sure the window |
2 Open the LCD monitor |
|
| |
Down (8) |
| side is facing out. | |
fully. ( pg. 12) |
|
| |
3 Press MENU. The | LCD |
|
|
menu screen appears. | BACKLIGHT |
|
|
4 Press Up (4/9) or |
| MENU |
Down (8) to select “n”, |
|
|
and press SET. The | BRIGHT |
|
|
| |
CAMERA DISPLAY or |
|
|
VIDEO DISPLAY menu appears. |
| |
5 Press Up (4/9) or Down (8) to select “BRIGHT”, and press SET. The menu screen closes and the brightness control indicator appears.
OPEN/ |
|
EJECT | Cassette holder |
|
Cassette holder cover
6 Press 3 or 5 until the appropriate brightness is reached.
7 Press SET to clear the brightness control indicator from the display.
LCD monitor’s backlight
For normal use, turn the backlight on (bright). If you are shooting in a bright location, turning the LCD backlight off makes the display darker and easier to see. It also reduces battery consumption.
To turn off the LCD backlight, press LCD BACKLIGHT.
●To turn on the LCD backlight, press LCD BACKLIGHT again.
Tripod Mounting
To attach the camcorder to a tripod, align the direction stud and screw to the mounting socket and stud hole on the camcorder. Then tighten the screw clockwise.
●Some tripods are not
equipped with studs.
1 Slide and hold OPEN/EJECT in the direction of the arrow, then pull the cassette holder cover open until it locks. The cassette holder opens automatically.
●Do not touch internal components.
2 Insert or remove a tape and press “PUSH HERE” to close the cassette holder.
●Be sure to press only the section labeled “PUSH HERE” to close the cassette holder; touching other parts may cause your finger to get caught in the cassette holder, resulting in injury or product damage.
●Once the cassette holder is closed, it recedes automatically. Wait until it recedes completely before closing the cassette holder cover.
●When the battery pack’s charge is low, you may not be able to close the cassette holder cover. Do not apply force. Replace the battery pack with a fully charged one or use AC power before continuing.
3 Close the cassette holder cover firmly until it locks into place.
●Be careful not to pinch your fingers by the cassette holder cover.
