MasterPage: Heading0_Left
28 EN ADDITIONAL FEATURES FOR D.S.C.
Still images can be dubbed from a tape to a
memory card.
1Load a cassette. (墌pg.16)
2Load a memory card. (墌pg. 17)
3Set the VIDEO/MEMORY switch to “VIDEO”.
4Set the power switch to “PLAY” while
pressing down the lock button located on the
switch.
5Set “ COPY” to “ON”.
(墌pg.33, 38)
6Press 4/9 to start playback.
7At the point you want to dub, press 4/9
again to engage Still Playback.
8To dub the image, press SNAPSHOT.
●The “ ” indication appears during dubbing.
NOTES:
●To use playback special effects with a video image
you wish to dub, perform up to step 8 using the
remote control. (墌pg.24)
●Images are dubbed in 640x 480 pixels.
By resetting the file name, a new folder will be
made. The new files you are going to make will
be stored in the new folder. It is convenient to
separate the new files from previously made
files.
1Perform steps 1–3 in “Normal Playback of
Images” (墌pg.26).
2Press MENU. The menu screen appears.
3Press Up (4/9) or Down (8) to select “NO.
RESET”, and press SET. The NO. RESET
screen appears.
4Press Up (4/9) or Down (8) to select
“EXECUTE”, and press SET. The new folder
(such as “101JVCGR”) will be made and the file
name of the next shot starts from DVC00001.
NOTE:
If the file name reaches DVC09999, a new folder
(such as “101JVCGR”) will be made and the file
name will start again from DVC00001.
The protect mode helps prevent the accidental
erasure of files.
1Perform steps 1–3 in “Normal Playback of
Images” (墌pg.26).
2Press MENU. The menu screen appears.
3Press Up (4/9) or Down (8) to select
“PROTECT”, and press SET. The sub menu
appears.
To protect the currently displayed file
4Press Up (4/9) or
Down (8) to select
“CURRENT”, and press
SET. The PROTECT
screen appears.
5Press 3 or 5 to
select the desired file.
6Press Up (4/9) or
Down (8) to select
“EXECUTE”, and press
SET.
●To cancel protection,
select “RETURN”.
●Repeat steps 5 and 6 for
all files you want to protect.
To protect all files stored in the memory card
4Press Up (4/9) or Down (8) to select
“PROT.ALL”, and press SET. The PROTECT
screen appears.
5Press Up (4/9) or Down (8) to select
“EXECUTE”, and press SET.
●To cancel protection, select “RETURN”.
NOTES:
●If the “ ” mark appears, the currently displayed
file is protected.
●When the memory card is initialised or corrupted,
even protected files are deleted. If you do not want
to lose important files, transfer them to a PC and
save them.
Dubbing Still Images Recorded on a Tape to a Memory CardResetting The File NameProtecting Files
PROTECTMENU RENT
PROT.ALL
CANC.AL L
RETURN
CUR
ROTECTP
RETURN
PROTECTED
GR-X5PAL.book Page 28 Thursday, April 7, 2005 7:23 PM