MasterPage: Heading0_Left
46 EN EDITING |
|
| |
Dubbing to or from a VCR | NOTES: | ||
|
| ● It is recommended to use the AC adapter as | |
|
| the power supply instead of the battery pack. | |
|
| ( pg. 14) | |
|
| ● To choose whether or not the following displays | |
| To S/AV | appear on the connected TV | |
| • Date/time | ||
Open the cover. | connector | ||
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. | |||
| |||
mark | ( pg. 33, 38) Or, press DISPLAY on the | ||
remote control to turn on/off the date indication. | |||
(provided) |
| ||
|
| • Time code | |
|
| Set “TIME CODE” to “OFF” or “ON”. | |
|
| ( pg. 33, 38) | |
|
| • Indications other than date/time and time code | |
|
| Set “ON SCREEN” to “OFF”, “LCD” or “LCD/ | |
|
| TV”. ( pg. 33, 38) | |
[Y/C] / [CVBS] Video Out Select Switch
Cable Adapter*
TV
VCR
To use this camcorder as a recorder
1 Following the illustrations, connect the camcorder and the VCR’s output connectors.
2 Set the camcorder’s power switch to “PLAY”.
3 Set “REC MODE” to “SP” or “LP”. ( pg. 33, 38)
A To
B Yellow to VIDEO IN or OUT
C Red to AUDIO R IN or OUT
D White to AUDIO L IN or OUT
*If your VCR has a SCART connector, use the provided cable adapter. (The provided cable adapter accepts only output signals from this camcorder. To use this camcorder as a recorder, use a commercially available cable adapter.)
**Connect when your TV/VCR has an
NOTE:
Set the video out select switch of the cable adapter as required:
Y/C: When connecting to a TV or VCR which accepts Y/C signals and uses an
4 Set “S/AV INPUT” to “A/V IN” or “S IN”*. ( pg. 33, 38)
*Select “S IN” when using
5 Press the recording start/stop button to engage the
●The “ A/V IN ” or “ S IN ” indication appears on the screen.
6 Start playback on the player.
7 At the point you want to start dubbing, press the recording start/stop button to start dubbing.
The 
indication rotates.
8 Press the recording start/stop button again to
stop dubbing. The 
indication stops rotating.
9 Press 8 to return to the normal playback mode.
To use this camcorder as a player
1 Following the illustrations, connect the camcorder and the VCR’s input connectors.
2 Start playback on the camcorder. ( pg. 20)
3 At the point you want to start dubbing, start recording on the VCR. (Refer to the VCR’s instruction manual.)
4 To stop dubbing, stop recording on the VCR, then stop playback on the camcorder.
NOTES:
●After dubbing, set “S/AV INPUT” back to “OFF”.
●Analogue signals can be converted to digital signals with this procedure.
●It is also possible to dub from another camcorder.
