MasterPage: Left 
48 EN EDITING
Connection to a Personal Computer | When connecting the camcorder to a PC | |
| ||
| using a DV cable, make sure to follow the | |
[A] Using USB cable [B] Using DV cable | procedure below. Connecting the cable | |
incorrectly may cause malfunctions to the | ||
| ||
OR | camcorder and/or the PC. | |
● Connect the DV cable first to the PC, and then | ||
| to the camcorder. | |
| ● Connect the DV cable (plugs) correctly | |
| according to the shape of the DV connector. | |
| [A] Using USB cable | |
| You can transfer still images stored on a memory | |
| card to a PC. |
To USB | To DV IN/OUT | |
| Core filter | |
USB cable | DV cable | |
(provided) | (optional) | |
| Core filter | |
To USB | To DV connector | |
connector | ||
|
[B] Using DV cable
You can also transfer still or moving images recorded on a tape to a PC with a DV connector by using the provided software, software equipped with the PC or commercially available software.
If you are using a Windows® XP, you can use Windows® Messenger to conduct video conferences over the Internet, using a camcorder. For details, refer to the help for the Windows® Messenger.
“USB” and/or “ 
” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC.
NEVER disconnect the USB cable while
“
” is displayed on the LCD monitor since this can result in product damage.
PC | PC with DV connector | NOTES: |
●If the icon for the recording medium is not displayed on the PC when the camcorder is connected to the PC with a USB cable, either reconnect the cable, or use another USB port.
●When the camcorder is connected to the PC with a DV cable, set the VIDEO/MEMORY switch to “VIDEO”.
●Refer to “SOFTWARE INSTALLATION AND PC CONNECTION GUIDE” for the bundled software and drivers.
●It is recommended to use the AC adapter as the power supply instead of the battery pack. ( pg. 14)
