MasterPage: Left 
22 EN VIDEO PLAYBACK
Connections to a TV or VCR
| To S/AV |
Open the cover. | connector |
| |
mark | |
(provided) |
|
1 Make sure all units are turned off.
2 Connect the camcorder to a TV or VCR as shown in the illustration.
If using a VCR, go to step 3. If not, go to step 4.
3 Connect the VCR output to the TV input, referring to your VCR’s instruction manual.
4 Turn on the camcorder, the VCR and the TV.
5 Set the VCR to its AUX (auxiliary) input mode, and set the TV to its VIDEO mode.
[Y/C] / [CVBS] Video Out Select Switch
Cable Adapter*
TV
VCR
6 Start playback on the camcorder. ( pg. 20)
To choose whether or not the following displays appear on the connected TV
● Date/Time |
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. |
( pg. 33, 38) |
Or, press DISPLAY on the remote control to turn |
on/off the date indication. |
● Time code |
Set “TIME CODE” to “ON” or “OFF”. |
( pg. 33, 38) |
● Indications other than date/time and time code |
A Black to
B Yellow to VIDEO IN (Connect when your TV/ VCR has only A/V input connectors.)
C Red to AUDIO R IN** D White to AUDIO L IN**
*If your TV/VCR has a SCART connector, use the provided cable adapter.
**Not required for watching still images only.
NOTE:
Set the video out select switch of the cable adapter as required:
Y/C: When connecting to a TV or VCR which accepts Y/C signals and uses an
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. |
( pg. 33, 38) |
NOTES:
●It is recommended to use the AC adapter as the power supply instead of the battery pack. ( pg. 14)
●To monitor the picture and sound from the camcorder without inserting a tape or memory card, set the camcorder’s power switch to “A” or “M”, then set your TV to the appropriate input mode.
●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.
