DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK
MasterPage: Start_Right |
D.S.C. RECORDING EN 25
Basic Shooting (D.S.C. Snapshot) | Continuous Shooting |
|
| ||
Keeping SNAPSHOT pressed in step 5 provides | |||||
You can use your camcorder as a Digital Still | |||||
an effect similar to serial photography. | |||||
Camera for taking snapshots. Still images are | |||||
To use this function, set “C SHOOTING” to “ON”. | |||||
stored in the memory card. | |||||
( pg. 33, 37) The | indicator appears. | ||||
NOTE: | |||||
Bracket Shooting |
|
| |||
Before continuing, perform the procedures listed |
|
| |||
below: | In addition to an image with the exposure | ||||
● Power ( pg. 13) | |||||
automatically set by the camcorder, two other | |||||
● Loading a Memory Card ( pg. 17) | |||||
images are recorded with exposure values | |||||
VIDEO/MEMORY | |||||
shifted to the +0.3EV and | |||||
| |||||
Power Switch | select the image that has a suitable exposure | ||||
after shooting. |
|
|
| ||
A |
|
|
|
| |
Lock Button |
|
|
|
| |
SNAPSHOT | Decreased | Standard | Increased | ||
| |||||
| exposure | exposure | exposure | ||
1 Remove the lens cap.
2 Open the LCD monitor fully. ( pg. 12)
3 Set the VIDEO/MEMORY switch to “MEMORY”.
4 Set the power switch to “A” or “M” while pressing down the lock button located on the switch.
●To change the image size and/or picture quality, pg. 33, 36, 37.
5 Press SNAPSHOT. The “O” indication appears while the snapshot is being taken.
●Still images are recorded in the snapshot mode with no frame.
●To delete unwanted still images, refer to “Deleting Files” ( pg. 29).
●When you do not want to hear the shutter sound, set “BEEP” to “OFF”. ( pg. 33, 35)
NOTES:
●If shooting is not performed for approx. 5 minutes when the power switch is set to “A” or “M” and power is supplied from the battery pack, the camcorder shuts off automatically to save power. To perform shooting again, close and
●For approximate number of storable images, see page 61.
1 Set “C SHOOTING” to “BRACKET”.
( pg. 33, 37) The 
indicator appears.
2 Set the VIDEO/MEMORY switch to “MEMORY”.
3 Set the power switch to “A” or “M” while pressing down the lock button located on the switch.
4 Press SNAPSHOT for bracket shooting.
●Three images are recorded.
To cancel bracket shooting mode
Set “C SHOOTING” to “OFF” in step 1.
NOTE:
The shutter speed cannot be fixed in the bracket shooting, even if the shutter priority ( pg. 45) is set.
DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK
