MasterPage: Video_Heading0_Right
EN 23
VIDEO RECORDING & PLAYBACK
VIDEO PLAYBACK
The full-function remote control unit can operate
this camcorder from a distance as well as the
basic operations (playback, stop, pause, fast-
forward and rewind) of your VCR. It also makes
additional playback functions possible.
(墌pg.24)
Installing the Battery
The remote control uses
one lithium battery
(CR2025).
1Pull out the battery
holder by pushing the lock
tab.
2Insert the battery in the
holder, and be sure to have the “+” mark visible.
3Slide the holder back in until you hear a click.
Beam Effective Area (indoor use)
When using the remote
control, be sure to point it at
the remote sensor. The
transmitted beam’s
approximate effective
distance for indoor use is 5 m.
Use the remote control in
front of the camcorder facing toward the lens.
NOTE:
The transmitted beam may not be effective or may
cause incorrect operation when the remote sensor
is directly exposed to sunlight or powerful lighting.
Buttons And Functions
AInfrared beam transmitting window
●Transmits the beam signal.
The following buttons are available only when
the camcorder’s power switch is set to “PLAY”.
BPAUSE Button
●Pauses the tape (墌pg.24)
Up Button (墌pg.24)
CSLOW Rewind Button (墌pg.24)
DREW Button
●Rewind/Reverse shuttle search on a tape
(墌pg.21)
●Displays previous file in a memory card
(墌pg.26)
Left Button (墌pg.24)
EINSERT Button (墌pg.49)
FSHIFT Button (墌pg.24)
GDISPLAY Button (墌pg.22, 46)
HSLOW Forward Button (墌pg.24)
IPLAY Button
●Starts playback of a tape (墌pg.20)
●Starts auto playback of images in a memory
card (墌pg.26)
JFF Button
●Forward/Forward shuttle search on a tape
(墌pg.21)
●Displays next file in a memory card (墌pg.26)
Right Button (墌pg.24)
KA. DUB Button (墌pg.50)
LSTOP Button
●Stops the tape (墌pg.20)
●Stops auto playback (墌pg.26)
Down Button (墌pg.24)
MEFFECT Button (墌pg.24)
NEFFECT ON/OFF Button (墌pg.24)
The following buttons are available when the
camcorder’s power switch is set to “A” or “M”.
oZoom (T/W) Buttons
Zoom in/out (墌pg.19, 24)
(Also available with the power switch set to
“PLAY”)
pSTART/STOP Button
Functions the same as the recording start/
stop button on the camcorder.
qS.SHOT Button
Functions the same as SNAPSHOT on the
camcorder.
(Also available with the power switch set to
“PLAY”)
Playback Using the Remote Control1
1
2
Lock tab
Remote sensor
GR-X5PAL.book Page 23 Thursday, April 7, 2005 7:23 PM