MasterPage: Start_Right 
EDITING EN 47
Dubbing to or from a Video Unit equipped with a DV Connector (Digital Dubbing)
It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a DV connector. Since a digital signal is sent, there is little if any image or sound deterioration.
To DV IN/OUT
●Even though the DV cable is connected correctly, sometimes the image may not appear in step 4. If this occurs, turn off the power and make connections again.
●If “Playback Zoom” ( pg. 24) or “Playback Special Effects” ( pg. 24) is attempted or SNAPSHOT is pressed during playback, only the original playback image recorded on the tape is output from the DV IN/OUT connector.
●When using a DV cable, be sure to use the optional JVC
To use this camcorder as a recorder
1 Make sure all units are turned off.
2 Connect this camcorder to a video unit equipped with a DV output connector using a DV cable as shown in the illustration.
3 Set the camcorder’s power switch to “PLAY”.
4 Set “REC MODE” to “SP” or “LP”. ( pg. 33, 38)
5 Press the recording start/stop button to engage the
Core filter 
DV cable (optional)
To DV IN/OUT
●The “ DV IN ” indication appears on the screen.
6 Start playback on the player.
7 At the point you want to start dubbing, press the recording start/stop button to start dubbing.
The 
indication rotates.
8 Press the recording start/stop button again to
stop dubbing. The 
indication stops rotating.
9 Press 8 to return to the normal playback mode.
Video unit equipped with DV connector
To use this camcorder as a player
1
2 Connect this camcorder to a video unit equipped with a DV input connector using a DV cable as shown in the illustration.
3 Start playback on the camcorder. ( pg. 20)
4 At the point you want to start dubbing, start recording on the video unit. (Refer to the video unit’s instruction manual.)
5 To stop dubbing, stop recording on the video unit, then stop playback on this camcorder.
NOTES:
●It is recommended to use the AC adapter as the power supply instead of the battery pack. ( pg. 14)
●If a blank portion or disturbed image is played back on the player during dubbing, the dubbing may stop so that an unusual image is not dubbed.
NOTES:
●If no image is displayed on the LCD monitor, set “S/AV INPUT” to “OFF”. ( pg. 33, 38)
●Digital Dubbing is performed in the sound mode recorded on the original tape, regardless of the current “SOUND MODE” setting. ( pg. 34)
ADVANCED
