JVC GV-HT1U manual Loading the Battery, Using AC power, Open The Battery Compart- Ment Lid

EN 19

Loading the Battery Using AC power

The battery (BN-V607) is not charged when shipped.

Charge it using the AC adapter before use.

When using the printer indoors, you can use the AC Adapter instead of a battery.

2

1, 3

1 OPEN THE BATTERY COMPART- MENT LID

•Slide and open the battery compartment lid in the direction of the arrow.

2 INSERT THE CHARGED BATTERY •Note that the battery may be damaged if

it is inserted incorrectly.

•Slide in the battery as far as it will go until it is properly seated.

3 CLOSE THE BATTERY COMPART- MENT LID

Removing the Battery

DC IN

Jack

To	DC IN
AC outlet	2

1

DC cord

Power lamp

1 CONNECT DC CORD

•Connect the DC cord to the AC Adapter then to the printer.

2 SUPPLY AC POWER

•Connect the power cord to an AC outlet.

NOTE:

When using the provided DC cord, make sure you connect the end of the cable with the core filter to the printer. The core filter reduces the interference.

•Open the battery compartment lid and take out the battery.