EN 37
Print Operations
MENU MEMORY PRINT
SELECT SET
Paper
MENU MEMORY PRINT
SELECT SET
5
6 PRESS THE MEMORY BUTTON WHEN THE IMAGE YOU WISH TO PRINT APPEARS
•This action stores the image you wish to print. •The message, “Please wait ...” is displayed on the LCD panel while the image is being stored.
•The memory icon 
indicates the following conditions.
on: image data has been stored in the printer
off: no image data is stored in the printer
7 INSERT PRINTING PAPER IN PAPER OUT/MANUAL FEED SLOT
•Slide in the printing paper with the printing surface up as far as it will go without curling it.
•Unless the printing paper is inserted straight, it will cause a paper jam.
8 | PRESS THE PRINT BUTTON | |
•Gently press the edge of the printing paper into | ||
| the printer. |
|
| •Release the paper when it is pulled into the printer. | |
| •The printer starts printing the stored image. | |
| •The message, “Please wait ...” is displayed on | |
| the LCD panel. Then the printer icon | |
| appears. | indicates the following |
| •The printer icon | |
| conditions. |
|
on: image data is being printed
off: printing has been completed
•After printing the message “Remove paper” is displayed.
When the paper is removed “Feed paper manually” is displayed.
This display indicates that the printer is now in the manual feed printing mode.
NOTES:
•You can add a frame, produce multipix prints or add special effects.
•To print the same image again, press the PRINT button. One print is made each time the PRINT button is pressed.
•To print a different image, perform operations in steps 5 to 8.
