0To end operations, tap “STOP”. Send Still Images via E-mail upon Detection
of Face or Movement (DETECT/MAILSETTING)
A still image is automatically captured and sent via e-mail when faces or
movements are detected by the camera.
Children may, for example, send still images to their parents via the camera
to inform them of the happenings at home.
.
Memo :
0The size of the still image that is captured in “DETECT/MAIL SETTING” is
640 x 360.
0Operation via connection to a smartphone (or computer) using “OUTSIDE
MONITORING” may be performed even during detection standby.
0When the camera is connected to a smartphone (or computer), “DETECT/
MAIL SETTING” will be temporarily unavailable.
0You can set to record videos on this unit automatically during detection.
“Recording on this unit” (A p. 27)
0To prevent too many e-mails from being sent in case of detections
occurring frequently, you can set the interval of e-mail delivery.
“Setting detection interval” (A p. 27)
Caution :
0This function is not designed for disaster or crime prevention.
0To prevent the situation of forgetting to turn off the power, this unit will turn
off automatically after 10 days of continuous usage.
0While on standby for notification mails, the focus is fixed. Perform the
camera settings first, then enable notification mails.
Focus may not be set correctly if the notification mails start before camera
settings are made. In this case, disable notification mails temporarily, then
enable it again.
0Be careful not to cause too much sending of e-mails. Depending on the
internet provider that provides the e-mail service, the e-mails may be
marked as spam or the usage limited may be exceeded.
Be sure to check the terms of the internet provider in advance to find out
if there are any restrictions on the number or size of e-mails that can be
sent.
0When setting another person as the recipient, be sure to obtain his/her
consent in advance.
0JVC will not be responsible for any trouble that occurs upon the sending
of mails.
What You Need
0Wireless LAN router (use a product that has a Wi-Fi certification logo)
0Internet connection
0Account for sending e-mails (Supports SMTP. E-mail services that is only
accessible from the web cannot be used.)
Necessary Settings
To send e-mails, the following settings are required.
*The above settings are not necessary if they have already been set for other
functions.
0Registering an access point
“Registering the Access Points to Connect (“ACCESS POINTS”)”
(A p. 35)
0Setting the account for sending e-mails
“Setting the Sender’s E-mail Address” (A p. 30)
0Registering the recipient’s e-mail address
“Registering the Recipient’s E-mail Address” (A p. 33)
oSelecting the Recipient’s E-mail Address
1Tap “MENU”.
(Operation on this camera)
Using Wi-Fi
23