Making Camera Settings from a Web Browser

You can change the camera settings from a web browser.
1Tap “MENU”.
(Operation on this camera)
.
REC
PLAY
MENU
0The shortcut menu appears.
2Tap “Wi-Fi” (Q) in the shortcut menu.
(Operation on this camera)
.
MENU
3Tap “NETWORK SETTINGS”.
(Operation on this camera)
.
Wi-Fi
NETWORK SETTINGS
4Tap “SET FROM WEB BROWSER”.
(Operation on this camera)
.
NETWORK SETTINGS
SET FROM WEB BROWSER
5Check the SSID and PASS shown on the camera’s screen, then register
them on the computer to connect.
(Operation on this camera)
.
WPS
********************************
QUIT
PASS:********************************
SSID:********************************
CONNECT USING Wi-Fi
SET FROM WEB BROWSER
0When the computer is connected to the camera, a URL appears on
the camera.
6Check the URL shown on the camera’s screen, then enter it on the
Internet Explorer (web browser).
(Operation on this camera)
.
QUIT
FROM YOUR WEB BROWSER
TO THE FOLLOWING URL
CHANGE SETTING BY CONNECTING
SET FROM WEB BROWSER
http://***.***.***.***:*****/
0To exit, tap “QUIT”.

You can change the Wi-Fi function of the camera from a web

browser.

“Adding/Changing/Deleting an Access Point” (A p. 52)
“ OUT MONITORING SET ” (A p. 53)
“ Wi-Fi DIRECT SETTING ” (A p. 53)
“ MAIL SETTING ” (A p. 53)
Using Wi-Fi
51