Registering the Recipient’s E-mail Address
Registers the e-mail addresses of recipients on the camera.
1Tap “MENU”.
(Operation on this camera)
.
REC
PLAY
MENU
0The shortcut menu appears.
2Tap “Wi-Fi” (Q) in the shortcut menu.
(Operation on this camera)
.
MENU
3Tap “NETWORK SETTINGS”.
(Operation on this camera)
.
Wi-Fi
NETWORK SETTINGS
4Tap “MAIL SETTING”.
(Operation on this camera)
.
MAIL SETTING
NETWORK SETTINGS
5Tap “RECIPIENT'S EMAIL”.
(Operation on this camera)
.
SENDER'S EMAIL
RECIPIENT'S EMAIL
MAIL SETTING
6Tap “ADD”.
(Operation on this camera)
.
ADD
RECIPIENT'S EMAIL
7Enter the recipient’s e-mail address.
.
CANCELSET
DELETE
RECIPIENT'S EMAIL
0Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
0Tap “DELETE” to delete a character.
0Tap “CANCEL��� to exit.
0Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0Tap E or F to move one space to the left or right.
0After setting, tap “SET”.
Memo :
0Up to 8 e-mail addresses can be registered as recipients.
Caution :
0When setting another person as the recipient, be sure to obtain his/her
consent in advance.
0Check whether notifications indicating errors have been sent to the
sender’s e-mail address. (Make use of a computer or similar devices as it
is not possible to check from the camera.)
If no notifications are received: Refer to “Unable to send e-mails.” and adjust
the settings accordingly.
If notifications are received: Check the content of the notification.
*Note
Do not continue sending e-mails with the same settings if you receive error
notifications. Depending on the provider, you may be marked as a sender
of spam (junk mail).
Using Wi-Fi
33