JVC GZ-EX210, GZ-EX250, GZ-EX215 manual Menu Settings, Setting Details

Using Wi-Fi

Menu Settings

Setting		Details
OUT MONITORING SET	Configures various settings related to outside monitoring.
	0	PASSWORD (Default: “0000”)
		Selects the password to access the camera.
	“Setting the Password (OUT MONITORING SET)” (A p. 28)
	0	UPnP (Default: “ON”)
		Sets the UPnP of the camera.
		・OFF: Disables UPnP.
		・ON: Enables UPnP.
	“Setting the UPnP of this Camera (OUT MONITORING SET)” (A p. 28)
	0	DDNS SETTING
		Configures various settings related to DDNS.
	“Setting Dynamic DNS (DDNS) on this Camera (OUT MONITORING SET)” (A p. 29)
VIDEO MAIL ATTN.	Selects the recipient’s e-mail address for video mails.
	“Record and Send Videos via E-mail (VIDEO MAIL ATTN.)” (A p. 25)
DETECT/MAIL SETTING	Configures various settings related to notification mails.
	0	RECIPIENT'S EMAIL
		Selects the recipient’s e-mail address for notification mails.
	“Registering the Recipient’s E-mail Address” (A p. 33)
	0	DETECTION METHOD (Default: “MOTION DETECTION”)
		Sets the detection method to start recording.
		・MOTION DETECTION: Starts recording upon detection of subject’s movements.
		・FACE DETECTION: Starts recording upon detection of human faces.
	“Setting the Detection Method of this Camera (DETECT/MAIL SETTING)” (A p. 34)
	0	DETECTION INTERVAL (Default: “10 minutes”)
		Sets the time period to enable detection again after the previous one.
	“Setting the Detection Interval of this Camera (DETECT/MAIL SETTING)” (A p. 34)
	0	SELF RECORDING (Default: “ON”)
		Sets whether to record videos on this camera during detection.
		・OFF: Does not record videos on this camera.
		・ON: Records videos on this camera.
	“Setting Self Recording on this Camera (DETECT/MAIL SETTING)” (A p. 35)
NETWORK SETTINGS	Configures various settings related to the network.
	0	ACCESS POINTS
		Adds, deletes, or perform LAN settings of access points (wireless LAN router).
	“Registering the Access Points to Connect (“ACCESS POINTS”)” (A p. 35)
	0	Wi-Fi DIRECT SETTING
		Configures various settings related to direct monitoring.
		・PASSWORD
		Sets the password for direct monitoring.
		ENFORCED GROUP OWNER (Default: “ON”)
		Sets whether to enforce authorization of the group owner.
		・OFF: Set this if connection to devices that support Wi-Fi Direct fails. (When set to OFF, connection to
		devices that do not support Wi-Fi Direct will be disabled.)
		・ON: It is recommended to set this usually.
	“Setting the Password (DIRECT MONITORING)” (A p. 40)
	“Setting the Enforced Group Owner (DIRECT MONITORING)” (A p. 41)
	0	MAIL SETTING
		Sets the e-mail addresses of the sender and recipient.
	“Setting the Sender’s E-mail Address” (A p. 30)
	“Registering the Recipient’s E-mail Address” (A p. 33)
	0	MAC ADDRESS
		Displays the MAC address of the camera.
		(The above shows the MAC address when connected to an access point, while the below shows the
		address during direct connection.)
	“Checking the MAC Address of this Camera” (A p. 41)
	0	SET FROM WEB BROWSER
		Enables configuration of the camera settings from a web browser.
	“Using the Wi-Fi Function from a Web Browser” (A p. 49)
	0	LOCK SETTINGS
		Sets a password to prevent others from seeing the network settings.
	“Protecting the Network Settings with a Password” (A p. 42)
	0	INITIALIZATION
		Returns the network settings to their default values.
	“Initializing the Network Settings” (A p. 42)

27