JVC HR-DD740U manual Start Search, Access Distant Code, Index Search, Instant ReView

30EN

PLAYBACKANDRECORDINGFEATURES(cont.)

	IME
	SCAN
	¢	¢
	q
REVIEW	2	2
	REW	FF

Index Search

Index codes are placed on the tape at the start of each recording. You can find and automatically play back from the start of any recording using the Index Search function.

1		START SEARCH
	£.
		While the tape is stopped, press TIME SCAN ª or
2		ACCESS DISTANT CODE
		To access a recording 2–9 index codes away, press
		TIME SCAN ª or £ repeatedly until the correct
		number is displayed on screen (only if SUPERIMPOSE
		is set to ON (☞ pg. 28). Playback begins automatically
		when the desired recording is located.
		● If necessary press REW or FF when play starts to
		search visually to find the very beginning of the
		desired program.

1	2	3
4	5	6
7	8	9
	0

REVIEW

1	3	Á	FF
REW
	7	8
¦

4¢

TIME SCAN

NOTE:

An index code is not placed on the tape when recording is paused and then resumed.

Instant ReView

At the press of a button, you can power up your VCR, rewind the tape and begin viewing the most recent timer-recorded program.

1	ACTIVATE INSTANT REVIEW
	After ensuring that the Timer mode is disengaged, press
	REVIEW.
	● The power comes on and the VCR rewinds to the index
	code indicating the start of the last timer-recorded
	program, then begins playback automatically.
	● You can access a program 2–9 index codes away
	from the current position on the tape. If, for example,
	you have 5 programs recorded and you want to
	watch the third one, press REVIEW three times.
	● If necessary press REW or FF when play starts to
	search visually to find the very beginning of the
	desired program.
	● If the tape is already rewound when REVIEW is
	pressed, it will play the tape from the beginning. It
	will not fast forward to an index code.
	● The Instant Review function will also operate if the
	VCR's power is on.