JVC HR-DD740U manual Unplug Vcrs Power, SET Remote Control, Code, Plug in Power Cord

54ENSPECIALFEATURES(cont.)

A/B

POWER

1 2 3

NUMBER "1"	5	6
4

7	8	9	NUMBER
	0		"2"

1 3 Á

¦ 7 8

4	¢
STOP

Control Two JVC VCRs

The remote control is capable of controlling two JVC VCRs independently; one set to respond to your remote control's A code control signals and another set to respond to B code control signals. The remote control is preset to send A code signals because your VCR is initially set to respond to A code signals. You can easily modify your VCR to respond to B code signals.

	UNPLUG VCR'S POWER
1	CORD
	Unplug from the AC outlet.
	SET REMOTE CONTROL
2	CODE
	While holding down A/B on the remote control, press
	the NUMBER key "2" and then press STOP.
3	PLUG IN POWER CORD
	Plug back in to the AC outlet.
4	TURN VCR POWER ON
	Press POWER on the remote.

The VCR will now respond only to B-code commands.

To set the VCR to respond to A code signals again, repeat the above procedures setting the A/B CODE switch to A, instead of B, in step 2.

You can control two VCRs with the same remote control by switching the remote's code between A and B.