JVC HR-DD740U manual On-Screen Timer Programming, Access Program SET, Information

44ENTIMERRECORDING(cont.)

On-Screen

Timer

Programming

Turn on the TV and select the VCR channel 3 or 4 (or AV mode).

OK

¢	¢
q
2	2

CH

MENU

1 2 3

4 5 6 NUMBER

7 8 9

NUMBER "9"

		0
NUMBER	"8"	CH
1	3	Á
¦	7	8

4¢

MENU

TIME SCAN

OK

You can directly program the VCR’s timer to record up to 8 shows, as far as a year in advance. Remember, the clock must be set before you can program the timer (☞ pg. 7 or 9).

1	LOAD A CASSETTE
	Make sure the record safety tab is intact. If not, cover
	the hole with adhesive tape, then load it into the VCR.
	● The VCR comes on, and the counter is reset,
	automatically.

	ACCESS ON-SCREEN
2	MENU
	Press MENU as many times as necessary to bring up the
	Main Menu screen.
	ACCESS PROGRAM SET
3	SCREEN
	Make sure the highlight bar (arrow) is on "PROGRAM
	SET", then press OK.
4	SELECT PROGRAM NUMBER
	Press the appropriate
			PROGRAM 1
	NUMBER keys or CH5°or
	TIME SCAN%Þto select a	DATE		– –/– –
		START		– –:– – AM
	vacant program number,	STOP		– –:– – AM
	then press OK. The first time
		CHANNEL		– – SP
	you set the timer program-
	ming function, all the	PRESS NUMBER KEY (O–9)
	program numbers will be	OR (5,°), THEN (OK)
		PRESS (MENU) TO END
	blank; in this case just press
	OK when the Program Set screen appears.
	SET PROGRAM
5	INFORMATION
	Press the appropriate NUMBER keys to set the date,
	start/stop time and channel number. Press CH or
				5°
	TIME SCAN%Þ to set AM/PM and tape speed (SP or
	EP). Press OK after AM/PM, channel number and tape
	speed settings.

*If you are using a DBS receiver, see "ATTENTION FOR DBS RECEIVER USERS" on next page.

●Any information comprised of 1 digit (except the channel number) should have a "0" entered before it.

●It is possible to set all information using the CH5° or TIME SCAN%Þ button.

(In this case, press OK after each setting.) Do not use the CH ° or TIME SCANÞ button to set the date.

●At the Program Set screen, the setting that can be set blinks. When setting of a highlighted item is completed, the highlight bar moves down by 1 line to the next item.

EXAMPLE

If you program the VCR to timer record a show on December 24 on channel 40 from 12:00 noon to 1:00 PM in SP mode, the screen will look like this:

PROGRAM 1

DATE	12/24	WED
START	12:00	PM
STOP	1:00	PM
CHANNEL	40	SP

PRESS NUMBER KEY (O–9) OR (5,°), THEN (OK)

PRESS (MENU) TO END

**You can record selected programs at the same time every weekday, or once a week. Before entering the month, press NUMBER key “8” (DAILY) or “9” (WEEKLY). Either "DAILY" or "WEEKLY" appears. Press again and "DAILY" or "WEEKLY" disappears. For weekly recording, the desired date for the day of the week must be entered.