![](/images/new-backgrounds/1278205/27820577x1.webp)
Recording Features
1 2 3
TV/VCR
4 5 6
7 8 9
0
C.RESET
1 3
Á
¦ 7 8
4 ¢
E
N
39
Record One Program While
Watching Another
1 | ENGAGE TV MODE |
During recording... | |
● Press TV/VCR. The VCR's VCR indicator goes out. (If | |
you are using the RF connection (☞ pg. 6) to view | |
| the output from your VCR, the TV broadcast being |
| recorded disappears.) |
| ● If you are using the AV connection (☞ pg. 6), to view |
| the output from your VCR, change the TV's input |
| mode from AV to TV. |
SELECT CHANNEL FOR
VIEWING
2 Use the TV’s channel selector to set the channel you want to watch.
Display Elapsed Recording
Time
RESET COUNTER TO ZERO
1 Before recording starts, press C.RESET. The counter resets to zero and displays the exact elapsed time as the tape runs.
DISPLAY ELAPSED TIME ON
SCREEN
2 During recording, press OSD at any time to see the elapsed time. All indications corresponding to the current status of the VCR are displayed for 5 seconds. The counter display remains on the screen indicating the elapsed time. Press OSD again to remove the display.
●Make sure "SUPERIMPOSE" is set to "ON" (☞ pg. 28).
●The indications are not be recorded.