JVC HR-DD845EK Basic, Load A Cassette, Point, Start Playback, Stop Playback, Scan, Shut Tle

12

PLAYBACK

	The easiest, most basic operation possible with your video
Basic
	recorder is tape playback. Already-recorded signals on a video
	tape are read by your video recorder and displayed on your TV
Playback	just like a TV programme.
			Make sure the window side is up, the rear label side is
			LOAD A CASSETTE
			facing you and the arrow on the front of the cassette is
		1 point toward the recorder. Don’t apply too much
Turn on the TV and select the VIDEO channel (or AV mode).			pressure when inserting.

						● The recorder power comes on automatically and the
						counter is reset to 0:00:00.
						● If the record safety tab has been removed, playback
			2			begins automatically.
						FIND PROGRAMME START
			IME
			SCAN		2	POINT
		1	SHUTTLE
						If the tape is advanced past the start point, press REW
						or turn the TIME SCAN SHUTTLE ring to the left.
			q			To go forward, press FF or turn the TIME SCAN
						SHUTTLE ring to the right.
			STOP/EJECT		3	START PLAYBACK
				PLAY		Press PLAY. “BEST” appears blinking in the recorder's
						display panel during automatic tracking (☞ pg. 22).
						● Playback picture quality of LP recordings will not be
			4	3		as high as SP recordings.
						STOP PLAYBACK
						Press STOP on the remote or STOP/EJECT on the
						recorder’s front panel. Then press STOP/EJECT to
		2			4 remove the cassette.
	1	2	3
	4	5	6		Usable cassettes
	7	8	9
		0	4
3	LAY
2 REW			FF	2

			● Compact VHS camcorder recordings can be played on
			this video recorder. Simply place the recorded cassette
	1	3	into a VHS Cassette Adapter and it can be used just like
4	STOP		any full-sized VHS cassette.
			● This video recorder can record on regular VHS and
			Super VHS cassettes. However, it will record and play
			back regular VHS signals only. It is not possible to play
			back a recorded Super VHS tape.