JVC HR-DD845EK setup guide DAILY Button enables timer recording of daily serials. pg. 25

( ADD TIME Button adds time to end of Video Plus+ timer recording (5 minutes each time button is pressed.) ☞ pg. 25

) DAILY Button enables timer recording of daily serials. ☞ pg. 25, 27

qWEEKLY Button enables timer recording of weekly serials. ☞ pg. 25, 27

w AUX Button selects recorder's auxiliary input mode. ☞ pg. 30

eTIMER Button — same as button on recorder. ☞ pg. 25, 27

r TV PROG +/– Button — same as button on recorder. ☞ pg. 20

tDATE +/– Button inputs date of program for timer recording. ☞ pg. 26

yTV/SAT/VCR Switch enables remote control of VCR or connected TV or satellite receiver.

☞ pg. 38, 39

u TV/VCR Button switches connected TV's mode between TV and AV. ☞ pg. 38

iFast Forward Button fast-forwards tape ☞ pg. 12; initiates high-speed forward search. ☞ pg. 13

o Pause Button — same as button on recorder. ☞ pg. 13

p Stop Button — same as button on recorder.

☞pg. 12

QPROG CHECK Button accesses Program screens/displays to check the program that you have programmed (next program's information screen/display appears each time button is pressed). ☞ pg. 28

W OK Button enters selections made in on-screen menus. ☞ pg. 10

ETV VOL %Þ Button controls volume of con- nected TV. ☞ pg. 38

57

Installing Batteries

1Open the battery compartment cover.

2Insert 2 "AA"-size batteries (provided) in the correct directions.

3Replace the cover.

How To Use

The remote control can operate most of your video recorder's functions, as well as basic functions of TV sets and satellite receivers of JVC and other brands. ☞ pg. 38, 39.

●Point the remote control toward the sensor window.

●The maximum operating distance of the remote control is about 8 m.

NOTE:

If for some reason the remote control doesn't work properly, remove its batteries, wait a short time and then try again.