JVC HR-DD845EK Access Programme, Revise Programme, Information, Check And Cancel Programmes

28

TIMERRECORDING(cont.)

Check And Cancel Programmes

TIMER

q

	SP/LP	TIMER
AUTO

	2
1	2	3
4	5	6
7	8	9

	0	TIMER
CANCEL		4

TV PROG

START+/–

	ACCESS PROGRAMME
1	DISPLAY AND/OR SCREEN
	Press PROG CHECK.
	● The display panel shows the programme start time.
	Pressing OK changes the display to the programme
	stop time, then the date and preset position.
	● If the recorder is turned on and the TV is set to its
	VIDEO channel or AV mode, you can check program
	information on screen as well.
	● Each time you press PROG CHECK, the next
	programme's information appears.
	If All Information Is Correct . . .
	. . . programming is completed.
	If You Wish To Revise Data . . .
	. . . with the recorder's power turned on, go to step 2.
	If You Wish To Cancel A Program . . .
	. . . with the recorder's power turned on, press CANCEL.
	All information you input is deleted.
	REVISE PROGRAMME
	INFORMATION
	Input the appropriate data using the START +/–, STOP
	+/–, DATE +/– and TV PROG +/– buttons on the
2 remote control.

	STOP+/–		DATE+/
			–
			CHECK
			PROG
		3	OK
MENU	1

PUSH JOG

Timer Warning

If you have programmed your recorder to timer-record a programme or a series of programmes, a warning appears on screen to tell you that the recording is to start in 5 minutes.

–WARNING– TIMER RECORDING

TO START SOON

[CANCEL]

NOTES:

●The warning only appears if

you’re not in the Timer mode at that time.

●If this recorder is being used as the player for tape dubbing, the warning screen is recorded on the tape in the other video recorder.

The warning blinks for the entire 5 minutes leading up to the start of timer recording. To clear the display, press CANCEL.