JVC HR-DD845EK Edit To Or From Another Video Recorder, Make Connections, Start Source Player

30

EDITING

Edit To Or

From Another

Video

Recorder

	2
1	2	3
4	5	6
7	8	9
NUMBER "0"	0	4

TV PROG

You can use your video recorder as the source player or the recording deck.

	MAKE CONNECTIONS
	Connect the player’s 21-pin SCART connector to the
	recorder’s 21-pin SCART connector as illustrated on the
1 below.
	When Using Your Video Recorder As The Source
	Player . . .
	. . . connect its AV1 IN/OUT connector to the recording
	deck.
	When Using Your Video Recorder As The Recording
	Deck . . .
.	. . . connect its AV2 IN or AV1 IN/OUT connector to the
	source player.

SET RECORDING DECK’S INPUT MODE

2 Set to AUX. With this video recorder, press NUMBER key "0" and/or TV PROG to select depending on the connector being used — “AU-1” for the AV1 IN/OUT connector, or “AU-2” for the AV2 IN connector.

START SOURCE PLAYER

3 Engage its Play mode.

START RECORDING DECK

4 Engage its Record mode.

3

1

NOTES:

●All necessary cables can be obtained from your dealer.

●If you use this recorder as the player for editing, be sure to turn off 3R Picture before starting. (☞ pg. 15)

TV Receiver		Player	Your recorder	Recorder	Your recorder	TV Receiver
		21-pin SCART Cable			RF Cable
		(not provided)
				21-pin SCART	(provided)
VIDEO						VIDEO
				Cable
CHAN-						CHAN-
	RF Cable			(not provided)
NEL or						NEL or
AV mode	(provided)					AV
						mode
		Another recorder		Another recorder
		Recorder		Player