14
EN
PLAYBACK
(cont.)
SPATIALIZER
REVIEW
1 2 3
4 5 6
7 8 9
0
1
REW
AUDIO
2
4
30 SEC
FF
PUSH JOG
Index Search
Your recorder automatically marks
index codes at the beginning of£ 2 each recording. This function gives
you quick access to any one of 9 index codes in either direction.
NOTE:
Before starting, make sure the recorder is in the Stop mode.
ACTIVATE INDEX SEARCH
1 Press PUSH JOG Þor %on the remote control. “ª 1” or “£ 1” is displayed on screen and search begins in the corresponding direction.
●To access index codes 2 through 9, press PUSH JOG
Þor %repeatedly until the correct index number is displayed.
Ex.: To locate the beginning of B from the current position, press PUSH JOG Þtwice.
To locate the beginning of D from the current position, press PUSH JOG %once.
Current position
A | B | C | D E | F | |||||
| 1 | 2 | 3 |
|
|
| |||
|
| % |
| % |
| Index |
| number | |
|
|
|
|
| |||||
|
|
|
|
|
|
| |||
●When the specified index code is located, playback begins automatically.
Instant ReView
Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last
NOTE:
Before starting, make sure that the recorder is off and that the Timer mode is disengaged.
1
ACTIVATE INSTANT
REVIEW
Press REVIEW. The recorder power comes on and the recorder searches for the index code indicating the start of the last
●The front display panel tells you how many programmes have been recorded. If you have, for example, 3 programmes, “REVIEW” and "3" appear and blink. To watch the first of the 3 programmes, press REVIEW three times. The recorder searches and begins playback automatically. You can access a programme as far as 9 index codes away from the current tape position.
NOTE:
Instant ReView is not possible while the recorder is in the Timer mode.
