JVC HR-DD857MS Basic Playback, EN11, Load A Cassette, Point, Start Playback, Stop Playback

PLAYBACK

EN11

Basic

Playback

Turn on the TV and select the VIDEO channel (or AV mode).

PLAY

The easiest, most basic operation possible with your video recorder is tape playback. Already-recorded signals on a video tape are read by your video recorder and displayed on your TV just like a TV programme.

LOAD A CASSETTE

Make sure the window side is up, the rear label side is

facing you and the arrow on the front of the cassette is

1 point toward the recorder. Don’t apply too much

pressure when inserting.

● The recorder power comes on automatically and the

counter is reset to 0:00:00.

● Select the appropriate colour system by pressing the

COLOUR SYSTEM button. (☞ pg. 40)

● If the record safety tab has been removed, playback

begins automatically. (☞ pg. 18)

FIND PROGRAMME START

COLOUR SYSTEM

STOP/EJECT

TIME SCAN SHUTTLE

2	POINT
	If the tape is advanced past the start point, press REW
	or turn the TIME SCAN SHUTTLE ring to the left.
	To go forward, press FF or turn the TIME SCAN SHUTTLE
	ring to the right.
	START PLAYBACK
	Press PLAY. “BEST” appears blinking in the recorder's
3 display panel during automatic tracking. (☞ pg. 22)
	STOP PLAYBACK

1 2 3

2

4 5 6

7 8 9

0 4

Press STOP on the remote or STOP/EJECT on the

recorder’s front panel. Then press STOP/EJECT to

4 remove the cassette.

Usable cassettes

LAY

1

FF

REW

3

STOP

●Compact VHS camcorder recordings can be played on this video recorder. Simply place the recorded cassette into a VHS Cassette Adapter and it can be used just like any full-sized VHS cassette.

●This video recorder can record on regular VHS and Super VHS cassettes. However, it will record and play back regular VHS signals only. It is not possible to play back a recorded Super VHS tape.