34
EN
EDITING
Edit To Or
From Another
Video
Recorder
COLOUR SYSTEM
You can use your video recorder as the source player or the recording deck.
MAKE CONNECTIONS
1 Connect the player’s AUDIO/VIDEO OUT connector to the recorder’s AUDIO/VIDEO IN connector.
●Use the L connector for monaural connection.
SET RECORDING DECK’S |
INPUT MODE |
Set to AUX. With this video recorder, press NUMBER |
key "0" and/or TV PROG to select depending on the |
2 connector being used — |
VIDEO/AUDIO input connectors, or |
panel VIDEO/AUDIO input connectors. |
START SOURCE PLAYER |
3 Engage its Play mode. |
START RECORDING DECK |
4 Engage its Record mode. |
1 2 3
4 5 6
7 8 9
NUMBER "0" | 0 |
|
1
2
4
TV PROG
NOTES:
●All necessary cables can be obtained from your dealer.●NTSC tapes being played back in the NTSC [PAL mode (☞ p. 41) cannot be dubbed to another recorder.
●When you dub an NTSC tape using your recorder as the playback deck, select NTSC 3.58 (or NTSC 4.43) with the COLOUR SYSTEM button. (☞ p. 40)
●If you use this recorder as the player for editing, be sure to turn off 3R Picture before starting. (☞ pg. 13)
IMPORTANT:
●To edit, both the player and the recorder must be of the same colour system. Press your recorder's COLOUR SYSTEM button to select the appropriate colour system.
●For more information on
TV Receiver | Player | Your recorder | Recorder | Your recorder | TV Receiver |
VIDEO | AV Cable |
|
|
| VIDEO |
(not provided) |
| AV Cable |
| ||
CHANNEL |
|
| CHANNEL | ||
|
|
| |||
|
| (not provided) |
| ||
RF Cable (provided) |
| RF Cable |
| ||
|
|
| |||
|
|
|
| (provided) | |
| Another recorder | Another recorder |
| ||
| Recorder |
| Player |
|
|
