JVC HR-DD857MS specifications Insert Editing, Locate End Point, Reset The Counter, 38ENEDITINGcont

38ENEDITING(cont.)

Insert Editing

Recorder		Your recorder
		TIME SCAN SHUTTLE
	TV		JOG
	PROG	PAUSE

Audio/Video signal

Another recorder

Player

NUMBER	1	2	3
			2
	4	5	6
"0"		8	9
	7
C.RESET		0	4

TV PROG

1

Insert editing replaces part of the recorded scene with new material. Both the picture and Hi-Fi audio soundtrack are replaced with new ones, while the normal audio soundtrack remains unchanged. If you wish to change the normal audio track as well, use the audio dubbing function simultaneously. Use your video recorder as the recorder.

Source tape

Before insert editing	Normal audio
Recorded tape	track

After insert editing	Video/Hi-Fi
	audio track

1		MAKE CONNECTIONS
		Connect the player's VIDEO OUT and AUDIO OUT
		connectors to your recorder's VIDEO and AUDIO
		connectors on the front panel.
2		SET INPUT MODE
		Press NUMBER key "0" and/or TV PROG so that "F-1"
		appears in place of a channel number.
3		LOCATE END POINT
		Load the recording cassette into your recorder, and play
		it back to determine the edit-out point (the end of the
		segment to be replaced) using the JOG/TIME SCAN
		SHUTTLE controls or PUSH JOGÞ%and PAUSE.
4		RESET THE COUNTER
		Press C. RESET to change the counter display to
	"0:00:00".
5		LOCATE START POINT
		Determine the edit-in point (the beginning of the
		segment to be replaced) using the JOG/TIME SCAN
		SHUTTLE controls or PUSH JOGÞ%and PAUSE.
		● Be sure to engage the Still mode at the edit-in point.

PAUSE

3

PUSH JOG