JVC HR-DD857MS specifications EN17, TimeScan Audio

EN17

TimeScan

Names of

Reverse

Forward

special-effects

playback

Search

Play

Slow-Motion

*Still

Slow-Motion

Play

Search

PAL/

SP

-9x

-7x

-5x

-3x

-1x

-1/6x

-1/18x

0

1/18x

1/6x

1x

2x

3x

5x

7x

9x

MESECAM

LP

-7x

-3x

-1/6x

-1/18x

0

1/18x

1/6x

1x

2x

5x

9x

NTSC

SP/EP

-7x

-5x

-3x

-1x

-1/6x

-1/18x

0

1/18x

1/6x

1x

2x

3x

5x

7x

Audio output

Audio is output.

Audio is not

Audio is

Audio is not

Audio is output.

output.

output.

output.

*Still mode cannot be engaged using the remote control's PUSH JOG engaged by pressing the PAUSE button.

Þ

or

%

button. Still mode can only be

●The speed is shown during TimeScan in the upper right corner of the TV screen for approx. 5 seconds. (The display may be distorted.)

●To resume normal playback, press PLAY.

●When using the recorder's TIME SCAN SHUTTLE ring, the playback speed may not change in the correct step if it is turned too fast.

●Picture and audio may become distorted when the recording speed changes. When this happens, resume normal playback once, and then try using TimeScan again.

●The picture may be noisy or there may be a loss of colour when you change the playback speed. (More noise will appear with LP recordings.)

●During high-speed search with an NTSC tape containing both SP and EP recordings, the search speed will change automatically to 7x normal playback speed with TimeScan when the recording tape speed switches from EP to SP.

●Noise may appear or the upper part of the picture may be distorted during still, frame-by-frame playback, 2x search, or depending on the tape being used.

●Picture may appear distorted in comparison to normal playback.

●In TimeScan mode there will be a time lag between the video and the audio and noise may appear in the audio signal.

●TimeScan sound quality will differ in comparison to normal playback.

●When material such as music videos where there is non-stop sound (very few breaks in the soundtrack) are viewed at 2x normal speed, the audio playback may be faster than normal.

●When the playback direction is reversed, it takes approximately 6 seconds until sound is heard.

●There will be a loss of colour or the picture will be monochrome with an LP-recorded MESECAM tape during TimeScan.

If you don't want to hear TimeScan audio, set "TIME SCAN AUDIO" to "OFF" (See below).

TimeScan Audio

The audio output can be set ON/OFF during TimeScan. Select ON/OFF as required. * The default setting is "ON".

1Press MENU to access the Main Menu screen.

2Place the pointer next to "FUNCTION SET" by pressing PUSH JOG %Þ, then press OK or PUSH JOG %.

3Place the pointer next to "TIME SCAN AUDIO" by pressing PUSH JOG %Þ, then press OK or PUSH JOG % to select "ON" or "OFF".

4Press MENU to return to the normal screen.

FUNCTION SET
AUTO TIMER	OFF
O.S.D.	ON
B.E.S.T.	ON
AUTO SP=LP TIMER	OFF
TIME SCAN AUDIO	ON
[5/°] =
[MENU] : EXIT