JVC HR-DD857MS EN27, Engage Recorder’S, Timer Mode, Return To Normal, Screen, programmes pg

NUMBER

STOP+/–

PROG.

1

4

7

1

2

5

DAILY3

6

9

2

4

WEEKLY

TIMER

EN27

	RETURN TO NORMAL
5	SCREEN
	Press PROG. or OK. "PROGRAM COMPLETED"
	appears on the screen for about 5 seconds, then normal
	screen appears.
	● Repeat steps 1 – 5 for each additional programme.
	ENGAGE RECORDER’S
6	TIMER MODE
	Press TIMER. The recorder turns off automatically and
	äappears on the display panel.
	● To disengage the timer, press TIMER again.

NOTES:

● To Change The Stop Time . . .

. . . press STOP +/– after pressing OK in step 3. You can

compensate for anticipated programme schedule delays this

way.

● To Timer-Record Weekly Or Daily Serials . . .

. . . after pressing OK in step 3, press WEEKLY (NUMBER key

3 OK

PUSH JOG

“9”) for weekly serials or DAILY (NUMBER key “8”) for daily

serials (Monday – Friday). Either "WEEKLY" or "DAILY"

appears on the screen. Pressing the button again makes the

corresponding indication disappear.

● You can programme this recorder to timer-record as many as 8

programmes. If you try to programme the recorder to record a

ninth, "PROGRAM FULL" appears on screen. To record the

extra programme, you must first cancel any unnecessary

programmes (☞ pg. 30).

● It is not possible to timer-record a TV programme with a

G-CODEnumber which starts with "0".

To timer record with simulcast...

...Press SIMUL after pressing OK in step 3; "SIM" appears on the right of TV PROG number. Set the FM tuner to the desired broadcast before the selected programme begins. Then set the FM tuner's timer. If the tuner doesn't have a timer, leave the unit's power turned on.

Satellite Tuner Users

To timer-record a satellite broadcast using G-CODE:

1Perform steps 1 – 6.

2Set the satellite tuner to the appropriate channel before the selected programme begins.

3Leave the satellite tuner's power on.

ATTENTION

Regarding Guide Program Number Set

"G-CODE SET-UP" appears after performing step 3 if the Guide Program number for the G-CODEnumber you entered has not been set.

●Press the NUMBER keys or PUSH JOG %Þ to input the channel position number on which your recorder

receives that station, then press OK or PUSH JOG %. The G-CODEprogram screen appears.

G-CODE SET-UP		(Ex.) To timer-record a RTR
GUIDE PROG	TV PROG	programme with G-CODE.
		* If your recorder receives
2	– –	RTR on the channel position
		2, press OK or PUSH JOG%
[0-9] OR [5/°]:SELECT =		after entering "2".
[PROG] : EXIT