JVC HR-DD857MS EN29, Set Tape Speed, Return To Normal, Screen, Engage Recorder’S, Timer Mode

1 2

4 5

78

0

DAILY3

6

9

2

WEEKLY

TIMER

4

EN29

SET TAPE SPEED

7 Press (SP/LP/EP) to set the tape speed.

RETURN TO NORMAL

SCREEN

After confirming all information is correct, press PROG.

or OK. "PROGRAM COMPLETED" appears on the

8 screen for about 5 seconds, then normal screen

appears.

● Repeat steps 1 – 8 for each additional programme.

ENGAGE RECORDER’S

TIMER MODE

PROG.	SP/LP/EP
	1

3 OK

9	Press TIMER. The recorder turns off automatically and
	äappears on the display panel.
	● To disengage the timer, press TIMER again.

To Timer-Record Weekly Or Daily Serials . . .

. . . anytime during steps 2 through 8, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday–Friday). Either "WEEKLY" or "DAILY" appears on the screen. Pressing the button again makes the corresponding indication disappear.

NOTE:

You can programme this recorder to timer-record as many as 8 programmes. If you try to programme the recorder to record a ninth, "PROGRAM FULL" appears on screen. To record the extra programme, you must first cancel any unnecessary programmes (☞ pg. 30).

To timer record with simulcast...

...While you perform steps 3 – 7, press SIMUL at any time; "SIM" appears on the right of TV PROG number. Set the FM tuner to the desired broadcast before the selected programme begins. Then set the FM tuner's timer. If the tuner doesn't have a timer, leave the unit's power turned on.