JVC HR-J439EE manual Select Position, Store Channel, Select Mode, Select Channel, Delete Channel

BAND SELECT

[TV PROG5°] =

[CH SET] :EXIT

SELECT POSITION

EN7

Delete A Stored Channel

6

Turn the TV PROG. dial until an open position in which you want to store a channel appears, then press OK.

SELECT NUMBER

TV PROG. 1

[TV PROG5°] = [CH SET] :EXIT

TURN ON THE RECORDER

1 Press OPERATE.

ACCESS CHANNEL SET

MODE SELECT SCREEN

STORE CHANNEL

2	Press and hold CH SET for more than 2 seconds. The
	Channel Set Mode Select screen appears.

7

If fine tuning is not necessary, simply press STORE. For fine tuning adjustment, turn the TV PROG. dial until the picture becomes clearer, then press STORE.

TV PROG. 1

[STORE] :STORE

[TV PROG5] :FINE TUNING + [TV PROG°] :FINE TUNING – [CH SET] :EXIT

3	SELECT MODE
	Turn the TV PROG. dial to place the pointer next to
	"DELETE", then press OK.
	SELECT CHANNEL

8

●To continue Auto Channel Search, turn the TV PROG. dial to select "CON-

TINUE", then press OK.

	Repeat steps 5 – 7 as	TV PROG. 1 ADDED
	necessary.
		CONTINUE
●	To set channels for other

bands, turn the TV PROG. dial to select

"BAND SELECT", then press OK to go back to

the Band Select screen. Repeat steps 4 – 7.

RETURN TO NORMAL SCREEN

Press CH SET.

Turn the TV PROG. dial
until the position number	SELECT NUMBER
4 of the channel you wish to	TV PROG. 1
delete appears.

●If the on-screen display is hard to read, refer to

[TV PROG5°] =

the recorder's display [CH SET] :EXIT panel.

DELETE CHANNEL
Press OK twice.
The screen shows the
5 selected channel has been	TV PROG. 1 DELETED
deleted.

●To delete another

channel, press OK again,	:CONTINUE
then repeat steps 4 – 5.	[CH SET] :EXIT

RETURN TO NORMAL

SCREEN

6 Press CH SET.

NOTE:

If you skipped a channel by mistake, perform steps 1 – 8 on pages 6 and 7 to re-store it.