44
EN
REMOTE CONTROL
INDEX
(
cont.)
1
2
3
4
5
6
7
8
9
0
!
@
#
|
|
| POWER | |
TV | 1 | 2 | 3 | |
| 4 | 5 | 6 | |
TV/VCR | 7 | 8 DAILY | 9 WEEKLY | |
TIMER | CANCEL | 0 AUX | ENTER | |
| C.RESET/CH SKIP |
| OSD | |
ADD |
|
| MENU | |
SP/EP | TV | CH |
| |
VOL | OK | |||
| ||||
1••REW | 3PLAY | FF•• Á | ||
¦REC | 7STOP | 8PAUSE | ||
DISPLAY | SEARCH | SKIP SEARCH | ||
TV operation – Press and hold TV button, then press POWER, CH 5/°, TV/ VCR
| 1 | TV Button (See below) | |
$ | 2 | TV/VCR Button (☞ pg. 28) | |
| 3 | CANCEL Button (☞ pg. 32) | |
% |
| Channel [CH] SKIP Button (☞ pg. 14) | |
| Counter [C.] RESET Button (☞ pg. 23) | ||
^ | 4 | TIMER Button (☞ pg. 31) | |
5 | ADD Button (☞ pg. 14) | ||
& | 6 | TV Volume [VOL] +/– Button (See below) | |
* | 7 | Recording Speed [SP/EP] Button (☞ pg. 16) | |
( | 8 | Rewind [REW] Button (☞ pg. 15) | |
9 | PLAY Button (☞ pg. 15) | ||
) | 0 | Record [REC] Button (☞ pg. 16) | |
q | ! STOP Button (☞ pg. 15) | ||
w | @ DISPLAY Button (☞ pg. 23) | ||
# SEARCH Button (☞ pg. 17) | |||
e | $ POWER On/Off Button (☞ pg. 8) | ||
r | % NUMBER Buttons (☞ pg. 16) | ||
^ DAILY Timer Recording Button (☞ pg. 30) | |||
t | |||
& WEEKLY Timer Recording Button (☞ pg. 30) | |||
* "AUX" Mode Select Button (☞ pg. 35) ( ENTER Button (☞ pg. 16)
q Channel [CH] 5° Button (☞ pg. 16) w OK Button (☞ pg. 8)
e
t SKIP SEARCH Button (☞ pg. 22)
Buttons shown in white on the illustration above can also be used to operate JVC TVs.
Installing Batteries
1Open the battery compartment cover.
2Insert 2
3Replace the cover.
How To Use
The remote control can operate most of your VCR's functions, as well as basic functions of JVC TV sets (see below).
1Point the remote control toward the sensor window.
2Press the appropriate operation button.
3The maximum operating distance of the remote control is about 8 m.
Operating JVC TVs
To operate your TV, while holding down TV, press the corresponding button: POWER, TV/VCR, CH 5°. TV VOL +/– can be used without holding down TV.
NOTES:
●Depending on the type of JVC TV, there may be cases where some or all functions cannot be operated using the remote control.
●If the remote control doesn't work properly, remove its batteries, wait a short time, replace the batteries and then try again.
