INITIAL
SETTINGS
EN
7
Plug & Play
Auto Clock Set/Auto Tuner Set
The Plug & Play function sets the clock and tuner channels automatically when power is first connected to the VCR. The antenna cable must be connected for the Plug & Play function.
The time and date can be set automatically from clock setting data that is transmitted by one of the regular TV broadcast channels. We call this TV channel the “Host Channel” and it is a PBS channel in your area.
2 | 2 |
q | 5/8 | 6 |
IMPORTANT
●Don’t press any buttons on the VCR or remote while Plug & Play is in progress.
●If you perform Plug & Play successfully, there’s no need to perform the Clock (☞ pg. 9) and Tuner (☞ pg. 12) procedures. If, however, you want to add or delete channels, refer to “Add Or Delete A Channel” on page 14.
ATTENTION CABLE BOX SUBSCRIBERS
If you perform the Plug & Play procedure . . .
●Select the PBS channel on your cable box before plugging your VCR’s power plug into the AC outlet. (If you have more than one PBS channel, you may have to select an alternative PBS channel if Plug & Play is not successful.)
●If there is no PBS channel in your area, perform the Manual Clock Set procedure (☞ pg. 11).
●For automatic clock adjustment to take place the VCR's power must be off and the cable box must be set to the PBS channel at clock adjustment times.
●If you perform Plug & Play successfully, D.S.T. will be set to “AUTO”. At the D.S.T. adjustment time (☞ pg. 11), your VCR's power must be off and your cable box must be set to the host PBS channel in your area for the D.S.T. adjustment to take place. If the clock is not set correctly, change the D.S.T. setting to “ON” or “OFF. See step 9 of
NOTE:
If the memory backup fails, because of a power outage or because the AC was removed from the VCR, Plug & Play will be performed when power is restored to the VCR.
1
PLUG & PLAY SETUP
Connect the antenna cable to the VCR (☞ pg. 6). Then connect the VCR’s power plug to an AC outlet. Do not power on the VCR. The clock and tuner channels will automatically be set.
●Auto clock set is performed first. The auto clock set function scans all the channels received by your VCR to find the Host Channel and then sets the clock. "Auto" blinks on the front display panel during Auto clock set.
●Auto channel set is performed next. The auto channel set function scans all the channels that are receivable by your VCR. It then automatically assigns each receivable channels to the CH▲▼ buttons. It skips
●When Plug & Play has been completed successfully the correct time is displayed.
●If "AUTO CLOCK SET" or
●If an incorrect time is displayed on the front display panel, you may be receiving the clock setting data of a PBS channel from an adjacent time zone, or an incorrect PBS channel from a cable TV system. In this case, perform the
●If “-
PM
During Initial Auto Clock Set | During Auto Channel Set |
"Auto" blinks. | The channel numbers are displayed |
| as they are scanned and set. |
Plug & Play Completed The current time (including AM/PM) is displayed.
