Honeywell
Figure 6-38 The Alarm Setup Menu
Please refer to the following sheet for detailed information.
Parameter | Function | |
|
| |
| It includes local alarm/network alarm. | |
Event Type | Local alarm: Device detects alarm from input port. | |
| Network: Device detects alarm from network. | |
|
| |
Alarm in | Select corresponding alarm channel, and check the checkbox | |
beside it to enable system to detect alarm signal | ||
| ||
|
| |
| There are two options: normal open and normal close. NO | |
Type | becomes activated in low voltage, NC becomes activated in | |
| high voltage. | |
|
| |
| Alarm record function becomes activated in the specified | |
| periods. | |
| There are six periods in one day. Please check the checkbox to | |
Period | enable corresponding period. | |
Select date. If you do not, the current setup applies to today | ||
| only. You can select the all week column to apply it to the whole | |
| week. | |
| Click OK button, system goes back to alarm setup interface, | |
| please click save button to exit. | |
|
| |
Not effective in current DVR version. | ||
|
|
133
