Web Client Operation
Please refer to the following sheet for detailed information.
Parameter | Function | |
|
| |
Channel | You can select monitor channel from the dropdown list. . | |
|
| |
Protocol | Select the corresponding dome protocol (such as PELCOD), | |
|
| |
| Set corresponding dome address. Default value is 1. Please | |
Address | note your setup here shall comply with your dome address; | |
| otherwise you cannot control the speed dome. | |
|
| |
Baud Rate | Select the dome baud rate. Default setup is 9600. | |
|
| |
Data Bit | Default setup is 8. Please set according to the speed dome dial | |
switch setup. | ||
| ||
|
| |
Stop bit | Default setup is 1. Please set according to the speed dome dial | |
switch setup. | ||
| ||
|
| |
Parity | Default setup is none. Please set according to the speed dome | |
dial switch setup. | ||
| ||
|
| |
| You can click the save button after you complete setup for one | |
Save | channel, or you can complete the whole setup and then click | |
| the save button. | |
|
| |
Refresh | Click this button to get the device’s latest configuration | |
information. | ||
|
Default & Backup
Default: Restore the factory default settings. You can select corresponding items.
Backup: Export current configuration to local PC or import configuration from current PC.
Please refer to Figure
138
