Honeywell HD-DVR-1008, HD-DVR-1004, HD-DVR-1016 Image FTP, Go to Detect Menu, Motion Detection

Honeywell

time, system can activate the activation snapshot when alarm occurs, and otherwise system just operates the schedule snapshot.

Image FTP

In Network interface, you can set FTP server information. Please enable FTP function and then click save button.

Please boot up corresponding FTP server.

Please enable schedule snapshot or activation snapshot first, now system can upload the image file to the FTP server.

After the system has booted up it will enter a default 24-hour regular mode. You can set the record type and time in schedule interface.

Detect

Go to Detect Menu

In the main menu, from Setting to Detect, you can see motion detect interface. There are three detection types: motion detection, video loss, camera masking.

Motion Detection

The detection menu is shown as below. See Figure 4-15.

•Event type: From the drop-down list you can select the “Motion Detection” type.

•Channel: Select the video channel for the motion detection setting.

•Record Channel: Select the channel to activate the recording function once the alarm has sounded. Please make sure you have set the MD recording in the schedule interface (Main MenuSettingSchedule) and automatic recording in manual record interface (Main Menu- >Advanced->Manual Record)

41