Honeywell
Click Save, you need to restart to activate your configuration.
After rebooting, DVR will connect to the internet automatically. The IP in the PPPoE is the DVR dynamic value. You can access this IP to visit the unit.
Figure 5-11 The PPPoE Setup Menu
NTP Setup
You need to install SNTP server (Such as Absolute Time Server) in your PC first. In Windows XP OS, you can use the command “net start w32time” to boot up NTP service.
NTP setup interface is shown in Figure
•Host IP: Input your PC address.
•Port: This series DVR supports TCP transmission only. Port default value is 123.
•Update interval: Minimum value is 1. Max value is 65535. (Unit: minute)
•Time zone: Select your corresponding time zone here.
Here is a chart for your time zone setup.
City/Region Name | Time Zone |
|
|
London | GMT+0 |
|
|
Berlin | GMT+1 |
|
|
Cairo | GMT+2 |
|
|
Moscow | GMT+3 |
|
|
New Deli | GMT+5 |
|
|
Bangkok | GMT+7 |
|
|
73
