Web Client Operation
Parameter | Function | |
|
| |
| Enable alarm activation function. You need to select alarm | |
Alarm Out | output port so that the system can activate corresponding alarm | |
| device when alarm occurs. | |
|
| |
Alarm | System can delay the alarm output for specified time after alarm | |
Latch | ended. The value ranges from 10 seconds to 300 seconds. | |
|
| |
| System auto activates current channel to record once alarm | |
Record | occurs (working with alarm activation function). Please note | |
Channel | current device shall be in auto record mode (see Motion | |
| Detection and Manual Record). | |
|
| |
Record | System can delay the record for specified time after alarm | |
Latch | ended. The value ranges from 10s to 300s. | |
Send Email | Enable email function. System can send out email to alert you | |
when alarm occurs and ends. | ||
| ||
| Display video in local monitor window by tour. If there are | |
Tour | record channels selected, only the record channels will be | |
| displayed in the tour. | |
|
| |
| Here you can set PTZ movement when alarm occurs. Such as | |
PTZ | go to preset x when there is an alarm. | |
activation | The PTZ configuration events include preset, | |
| pattern. | |
Copy | It is a menu shortcut button. You can copy the current channel | |
setup to one or more (all) channels. | ||
| ||
|
| |
| You can click the save button after you complete setup for one | |
Save | channel, or you can complete the whole setup and then click | |
| the save button. | |
|
| |
Refresh | Click this button to get the device’s latest configuration | |
information. | ||
| ||
|
|
Detect
Analyzes the video. The system enables the motion detection alarm when it detects the motion reaches the specified sensitivity.
The detection interface is shown as in Figure
134
