Honeywell HD-DVR-1008, HD-DVR-1004, HD-DVR-1016 user manual IP Filter, Multiple Cast

Honeywell

Advanced setup interface is shown in Figure 5-9.Draw a circle to enable the corresponding function and then double-click the current item to go to the setup interface.

Figure 5-9 Advanced Settings

IP Filter

IP filter interface is shown in Figure 5-10.You can add IP in the following list. The list supports a max of 64 IP addresses.

Note that after you enable this function, only the IP listed below can access current DVR.

If you disable this function, all IP addresses can access the current DVR.

Figure 5-10 IP Filter Menu

Multiple Cast

Here you can set a multiple cast group. Please refer to the following sheet for detailed information.

71