Honeywell HD-DVR-1008, HD-DVR-1004, HD-DVR-1016 user manual Display, The PTZ Setup Menu

Understanding of Menu Operations and Controls

After completing all the setups click Save, and the system will go back to the previous menu.

For a detailed setup, refer to Preset/Tour/Pattern/Scan Operations.

Figure 5-19 The PTZ Setup Menu

Display

Display setup interface is shown as below. See Figure 5-20.

•Transparency: Here you can adjust transparency. The value ranges from 128 to 255.

•Channel name: Here you can modify the channel name. System max support 25-digit (The value may vary due to different series). Please note all your modification here only applies to DVR local end. You need to open web or client end to refresh the channel name.

•Time display: You can select to display time or not when system is in playback.

•Channel display: You can select to channel the name or not when system is in playback.

•Resolution: Set VGA and HDMI output resolution, 1280x720 (720p) is recommended for HDMI output.

•Enable tour: Activate tour function.

80