Honeywell HD-DVR-1016, HD-DVR-1004, HD-DVR-1008 user manual Network Connection, Login

Web Client Operation

6Web Client Operation

•All the operations here are based on HD-DVR-1016.

Note	• There might be slight differences in the interface due
	to the updated series.

Network Connection

Before the web client operation, please check the following items:

•Network connection is right

•DVR and PC network setup is right. Please refer to network setup (main menusettingnetwork)

•Use order ping ***.***.***.***(* DVR IP address) to verify that there is a good connection. Usually, the return TTL value should be less than 255.

•Open the IE and then input DVR IP address.

•System can automatically download latest web controls and the new version can overwrite the previous one.

•If you want to un-install the web control, please run uninstall webrec2.0.bat. Or you can go to C:\Program Files\webrec to remove single folder. Please note, before you un-install, please close all web pages, otherwise the un-installation might result in error.

Login

Open IE and input DVR address in the address column. For example, if your DVR IP is 10.10.3.16, then please input http:// 10.10.3.16 in IE address column. See Figure 6-1

102