Overview of Navigation and Controls
Activate Patrol (tour)
In Figure 4-32,input the patrol (tour) number in the No. blank and click the patrol button.
Pattern Setup
In Figure 4-32,click Pattern and then click “begin. The interface is shown as in Figure 4-36.Then you can go to Figure 4-31to modify zoom, focus, and iris.
Go back to Figure 4-36and click End. You can memorize all these operations as pattern 1.
Figure 4-36 Pattern Setup
Activate Pattern Function
In Figure 4-33,input a mode value in the “No.” field, and click Pattern.
Auto Scan Setup
In Figure 4-32,click Border. The interface is shown in Figure 4-29.
Please go to Figure 4-31,use direction arrows to select camera left limit.
Then please go to Figure 4-37and click left limit button
Repeat the above procedures to set right limit.
