JVC HR-J642U manual Edit From a Camcorder, SET RECORDER’S Input, Mode, Access Special

36EN

EDITING(cont.)

Edit From A Camcorder

Recorder	AUDIO IN	Your VCR
		2	2

q 5/8 6

	To rear panel PAUSE/
	AV COMPU LINK connector
	Mini-plug cable (not supplied)
VIDEO	(JVC camcorder only)
IN
	Audio/Video cable
	(not supplied)
	VIDEO
	OUT

You can use a camcorder as the player and your VCR as the recorder.

1	MAKE CONNECTIONS
	Connect an AV cable between the camcorder’s VIDEO
	OUT and AUDIO OUT connectors and your VCR’s
	VIDEO IN and AUDIO IN connectors.
	● When a Master Edit Control-equipped JVC camcorder is
	used, the camcorder is capable of controlling your VCR.
	The mini-plug cable is a mono 3.5 mm mini-plug to
	mono 3.5 mm mini-plug connector.
	● If connecting to a camcorder with a monaural output,
	connect the audio output connector on the
	camcorder to AUDIO IN L of the VCR.
	LOAD A CASSETTE
2 Insert the cassette to be recorded on into the recorder.
	SET RECORDER’S INPUT
	MODE
3 Press NUMBER key “0” to set to AUX.
	ACCESS MAIN MENU
	SCREEN
	Press MENU.

Camcorder

Player

AUDIO OUT

EDIT

4
	ACCESS FUNCTION SET
5	SCREEN
	Press CH5° to move the highlight bar (arrow) to
	“FUNCTION SET”, then press OK.
	If you’re using a JVC Master Edit Control-equipped
	camcorder — step 6
	If not — step 9

	1	2	3
	4	5	6
	7	8	9
		0
NUMBER "0"
			MENU
CH			OK
1	3		Á
¦	7		8

	ACCESS SPECIAL
6	FUNCTION SCREEN
	Press CH5° to move the highlight bar (arrow) to
	“SPECIAL FUNCTION”, then press OK.
7	SELECT MODE
	Press CH5°to move the		SPECIAL FUNCTION
	highlight bar (arrow) to
	“PAUSE”.		=PAUSE
			AV COMPU-LINK
	● Make sure the VCR is in
	the Stop mode before
	you change the setting.
		PRESS (5,°) TO SELECT
		PRESS (MENU) TO END