JVC HR-S6722EK setup guide Minimizing Picture Degradation While Editing, Access Main Menu Screen

32ADVANCEDOPERATIONS(cont.)

Minimizing

Picture

Degradation

While Editing

Turn on the TV and select the VIDEO channel (or AV mode).

– –:– –

1 2 3

2

4 5 6

7 8 9

4

0

1 ?

OK

MENU

Advantages Of S-VHS Video Recorders

You can edit from VHS to S-VHS, S-VHS to VHS, or, from S-VHS to S-VHS.

●From VHS to S-VHS: Record VHS playback signals in the S-VHS mode. Although the picture quality is inherently limited by that of the original, the edited tape has better picture quality than those made by VHS-to-VHS editing.

●From S-VHS to VHS: Because the picture quality of the source material is very high, the edited tape has better picture quality than those made by VHS-to-VHS editing.

●From S-VHS to S-VHS: All signals will be transferred with minimum degradation.

Picture Control

This feature helps you to adjust the playback picture quality according to your preference. *The default setting is "AUTO."

	ACCESS MAIN MENU
	SCREEN
1 Press MENU.
	ACCESS MODE SET
	SCREEN
	Move the highlighted bar (pointer) to "MODE SET" by
2 pressing %Þ, then press OK or #.
	SELECT PICTURE
	CONTROL SET MODE
	Move the highlighted bar		MODE SET
	(pointer) to "PICTURE		B. E. S. T.	ON
	CONTROL" by pressing
			PICTURE CONTROL	AUTO
3 %Þ, then press OK or #to			AUTO TIMER	OFF
	select the desired mode.		O. S. D.	ON
			DIRECT REC	ON
	AUTO: Provides		AUTO SP=LP TIMER	OFF
		optimised picture	POWER SAVE	OFF
			NEXT PAGE
		benefits of B.E.S.T.
			[5°] =
		Picture System.	[MENU] : EXIT
		Normally select
		"AUTO".
	EDIT:	Minimizes picture degradation during editing
		(recording and playback).
	SOFT:	Reduces image coarseness when viewing
		overplayed tapes containing a lot of noise.
	SHARP: Clearer, sharper-edged picture when viewing
		images with lots of flat, same-coloured surfaces
		such as cartoons.

NOTES:

●When you select "EDIT", "SOFT" or "SHARP", the selected mode will not change until you select again.

●When you select "EDIT" to dub tapes, be sure to select "AUTO" after you finish dubbing the tapes.

RETURN TO NORMAL

SCREEN

4 Press MENU.

NOTES:

●When "B.E.S.T." is "OFF", "PICTURE CONTROL" switches automatically from "AUTO" to "NORM".

●Select "EDIT" when you are dubbing tapes. Refer to page 33 or 34.