JVC HR-S6722EK Edit To Or From Another Video Recorder, SET Recording DECK’S, Input Mode

34ADVANCEDOPERATIONS(cont.)

Edit To Or

From Another

Video

Recorder

– –:– –

1 2 3

2

4 5 6

7 8 9

4

AUX 0

PR

1 ?

You can use your video recorder as the source player or as the recording deck.

MAKE CONNECTIONS

1 Connect the player’s 21-pin SCART connector to the recorder’s 21-pin SCART connector as illustrated on page 35.

AWhen Using Your Video Recorder As The Source Player ...

... connect its AV1 (L-1) IN/OUT connector to the recording deck.

BWhen Using Your Video Recorder As The Recording Deck ...

... connect its AV2 (L-2) IN/DECODER or AV1 (L-1) IN/OUT connector to the source player.

CIf Another Recorder Is Compatible With The Y/C Signal ...

... connect your recorder's AV1 (L-1) IN/OUT connector to another recorder.

With C connection ...

●When using your recorder as the recording deck, set "L-1 INPUT" to "S-VIDEO" and "L-2 SELECT" to "A/V" (☞ pg. 36).

●When using your recorder as the source player, set "L-1 OUTPUT" to "S-VIDEO" (☞ pg. 36).

	SET RECORDING DECK’S
	INPUT MODE
	Set to AUX. With this video recorder, press AUX and/or
	PR to select “L-1” for the AV1 (L-1) IN/OUT connector,
2 or “L-2” for the AV2 (L-2) IN/DECODER connector,
	depending on the connector being used.
	● When using the AV2 (L-2) IN/DECODER connector,
	set "L-2 SELECT" to the appropriate mode. (☞ pg. 36)
3	SET EDIT MODE
	See "Picture Control" on page 32.
4	START SOURCE PLAYER
	Engage its Play mode.
5	START RECORDING DECK
	Engage its Record mode.