JVC HR-S6722EK setup guide Recorder Player

							35
A				B
TV Receiver		Player	Your recorder	Recorder	Your recorder		TV Receiver
		21-pin SCART Cable
VIDEO		(not provided)		21-pin SCART Cable		RF Cable
CHAN-						(provided)	VIDEO
				(not provided)
NEL or							CHANNEL
	RF Cable
AV mode							or AV mode
	(provided)
		Another recorder		Another recorder
		Recorder		Player
C
TV Receiver		Recorder	Your recorder
		S-Video Cable
		(not provided)
		21-pin SCART Cable
		(not provided)
		Another recorder
		Player
NOTES:

●All necessary cables can be obtained from your dealer.

●For Y/C signal input/output, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.

●When you select "EDIT" to dub tapes in step 3, be sure to select "AUTO" (or "NORM" when "B.E.S.T." is set to "OFF") after you finish dubbing the tapes.

●When you use this recorder as the player for editing, be sure to set "O.S.D." to "OFF" before starting (☞ pg. 37).

●If you are using another recorder with S-Video and Audio input/output connectors, you can connect those connectors to this recorder's S-VIDEO IN/S OUT and AUDIO IN/OUT connectors.

When Using Your Video Recorder As The Source Player ...

... connect its rear panel S OUT and AUDIO OUT connectors to the recording deck's S-Video and Audio input connectors. When Using Your Video Recorder As The Recording Deck ...

... connect its front panel S-VIDEO and AUDIO input connectors to the source player's S-Video and Audio output connectors. Then, set the recorder's input mode to "S-1".